D-O v2 Controlboard & Power PCB
21. September 2020
Astrocomms Mega Shield Pro
21. September 2020
Dome Benduino AIO Pro
89,00€
The Dome Benduino AIO pcb is a pcb similar to the Marcduino 1.5 compact and Flthy Holo pcb.
But instead of soldering all the Arduino components it runs of a Arduino Pro Mini and has it’s own power for the servos.
The Dome Benduino AIO is a single PCB with a master and slave Benduino and the FLTHY Holo pcb on one pcb – less wiring for you
It comes pre-built with your desired sketch for the master (which can always be overwritten with another one).
Features:
- small form factor of 101 x 71mm
- fully compatible with the Marcduino firmware
- all (well most) needed pins are available as terminals
- voltage regulators on board or power the servos external
If you want to build your own board select DIY Kit. You’ll get the PCB with smd components pre-soldered. The other components are pretty easy to source.
The Dome Benduino AIO pcb is a pcb similar to the Marcduino 1.5 compact and Flthy Holo pcb.
But instead of soldering all the Arduino components it runs of a Arduino Pro Mini and has it’s own power for the servos.
The Dome Benduino AIO is a single PCB with a master and slave Benduino and the FLTHY Holo pcb on one pcb – less wiring for you
It comes pre-built with your desired sketch for the master (which can always be overwritten with another one).
Features:
- small form factor of 101 x 71mm
- fully compatible with the Marcduino firmware
- all (well most) needed pins are available as terminals
- voltage regulators on board or power the servos external
For more information check out the Printed Droid Wiki: https://www.printed-droid.com/kb/benduino-system/
If you want to build your own board select DIY Kit. You’ll get the PCB with smd components pre-soldered. The other components are pretty easy to source.
Original Flthy code rights belong to FlthyMcNasty (Ryan Sondgeroth) and Marcduino V2 software rights belong to CuriousMarc & Neil Hutchinson and Marcduino V3 rights belong to Neil Hutchison.
| Weight | 0,075 kg |
|---|
Related products
-
Teeces – regular (PCBs only)
30,00€ -
Teeces – regular (PNP)
180,00€
