Benduino Single (2024)
29. July 2024
Dome Benduino AIO Pro (2024)
29. July 2024
Double Benduino (2024)
59,00€
The Double Benduino is a drop in replacement for the existing Marcduino compact Dome Master/Slave setup.
Same features, can run the same firmware but runs on 2 Arduino Pro Mini. All needed pins are there and it has it’s own power terminal for the servos.
All the connections between Master/Slave are on the PCB, so less wiring for you.
The 2024 version uses Arduino Nanos and has all pins for the Betterduinosetup. Betterduino allows Holocontrol without a Jolocontroller (like Flthy).
More Infos about Betterduino: https://github.com/RealNobser/BetterDuinoFirmwareV4
It comes pre-built with your desired sketch (which can always be overwritten with another one)
If no sketch is selected it comes unprogrammed.
Dimensions: 81 x 63mm
More Info: https://www.printed-droid.com/kb/benduino-system/
If you want to build your own board select DIY Kit. You’ll get the PCB with smd components pre-soldered. The other components are pretty easy to source.
The Double Benduino is a drop in replacement for the existing Marcduino compact Dome Master/Slave setup.
Same features, can run the same firmware but runs on 2 Arduino Pro Mini. All needed pins are there and it has it’s own power terminal for the servos.
All the connections between Master/Slave are on the PCB, so less wiring for you.
The 2024 version uses Arduino Nanos and has all pins for the Betterduinosetup. Betterduino allows Holocontrol without a Jolocontroller (like Flthy).
More Infos about Betterduino: https://github.com/RealNobser/BetterDuinoFirmwareV4
It comes pre-built with your desired sketch (which can always be overwritten with another one)
You choose the Master sketch, the corresponding slave sketch will be burned to the slave board.
If no sketch is selected it comes unprogrammed.
Dimensions: 81 x 63mm
More Info: https://www.printed-droid.com/kb/benduino-system/
If you want to build your own board select DIY Kit. You’ll get the PCB with smd components pre-soldered. The other components are pretty easy to source.
Original Flthy code rights belong to FlthyMcNasty (Ryan Sondgeroth) and Marcduino V2 software rights belong to CuriousMarc & Neil Hutchinson and Marcduino V3 rights belong to Neil Hutchison.
Related products
-
Dome Button Controller
15,00€ -
Printed Droid Full Special
1.030,00€
